Call 08045357852 90% Response Rate

Send Email

Hydraulic Press Machine

Pioneers in the industry, we offer hydraulic press brake machine, horizontal hydraulic presses, automatic sheet metal press brake machine, nc hydraulic press brake machine and pillar type hydraulic press machine from India.
Hydraulic Press Brake Machine

Hydraulic Press Brake Machine

Product Price: Rs 4.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
Capacity40 Ton (Bending Capacity)
Control TypeNon-CNC
Automation GradeSemi-Automatic
BrandPilot
MaterialMS
Country of OriginMade in India
Model Name/NumberPBR425
Dimension2700x1150x1900 mm
Sheet Length2500 mm
We are a reputed entity in the industry, actively engaged in offering an optimum quality range of Hydraulic Press Brake Machine.

Design Features:
  • Mono block welded steel frame ultra tested 2062 steel plates rigid to provide accurate bending.
  • All pivots have been hardened of ground pin bushes of five piece guide slide lubricated by central hand pump.
  • Repetitive accuracy is within ± 0.03 mm ".
  • Ram travel parallelism without sensitive and complex servo hydraulics.
  • Most reliable hydraulic components & sealing for international reputed design for 350 bar against operating pressure of 160 bar maximum.
  • Three cycles operation inch, Single cycle & Auto for greater operator convenience.
  • Three speed operation reduces ideal travel time which improves productivity. Bending force easily adjustable from soft material.
  • Movable operator console is provided with switched for cycle selection, ram up-down travel, emergency stop & motor on/off.
  • Manual backstop with micro adjustable swing stop facilitate reverse bend.
  • Electrical panels & components are provided as per international reputed brands.
  • Precisely designed of manufacture cylinders provided unlimited trouble-free life, Seals can be changed quickly without dismantling the ram or need of crane.


Standard Features & Accessories:

  • Main drive standard make motor.
  • Electrical control panel with three speed inch, Single cycle, Auto mode of operation. Two front sheet supports.
  • Manual back gauge with micro-adjustment swing stoppers.
  • Pair of lifting chains.
  • Fine stroke adjustment rod with limit switches.
  • One suitable 5-way die and blade, (Segmented or full length, EN-9 not covered under warranty).
  • Movable console with emergency device. Manual centralized lubrication system with hand pump.
  • Bending chart.


Optional Accessories:

  • Ram tilting arrangement.
  • Motorized back gauge with DRO.
  • Extra Finger for standard back gauge.
  • Automatic Lubrication System.
  • Extra depth of throat.


Additional Information:

  • Delivery Time: 25-30 DAYS
  • Packaging Details: PLASTIC PACKING
Get Best Quote Request Callback
Hydraulic Press Brake Machine

Hydraulic Press Brake Machine

Product Price: Rs 10 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
Capacity160 Ton (Bending Capacity)
MaterialMild Steel
Control TypeNon-CNC
BrandPilot
Automation GradeAutomatic
Country of OriginMade in India
Model Number/NamePBR1630
Dimension3700x1550x2300 mm
Motor Power15 HP
Sheet Length3000 mm
With an objective to fulfill the ever-evolving demands of our clients, we are engaged in offering a wide assortment of Hydraulic Press Brake Machine.

Additional Information:

  • Delivery Time: 25-30 DAYS
  • Packaging Details: PLASTIC PACKING
Get Best Quote Request Callback
Horizontal Hydraulic Presses

Horizontal Hydraulic Presses

Product Price: Rs 2.5 Lakh / UnitGet Best Price

Product Details:
Capacity60 Ton (Bending Capacity)
Usage/ApplicationIndustrial
Automation GradeFully Automatic
Control TypeNon-CNC
BrandPilot
MaterialMS, SS, Aluminum
Surface FinishingColor Coated
Voltage280 V
Country of OriginMade in India
FeaturesHorizontal

Pilot Engineering, have been making premium quality Horizontal Hydraulic Presses. Working day and night to build hydraulic presses that are suited for robust and prolonged use, we keep coming with revolutionary innovations. Our horizontal hydraulic presses are equipped with the latest electronic control systems and can be used to bend, straighten, bar, shaft, punch and cut channels, round bar angles, and I sections. Widely popular as the horizontal hydraulic presses manufacturer with the widest range of horizontal presses in India. Made with top notch steel alloy, our horizontal presses are known for their longevity and durability. Easy to operate and running low on maintenance, these machines are the most affordable alternatives to any mechanical press. Fabricated from high grade raw materials, our horizontal presses provide the best return on investment. Our clients can avail from us superior quality of horizontal press. This horizontal press are made from high quality of raw material which ensure durability at its user end. These products are available in market at competitive rates.

Get Best Quote Request Callback
Automatic Sheet Metal Press Brake Machine
  • Automatic Sheet Metal Press Brake Machine
  • Automatic Sheet Metal Press Brake Machine
  • Automatic Sheet Metal Press Brake Machine

Automatic Sheet Metal Press Brake Machine

Product Price: Rs 5.25 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationSheet Bending
Capacity80 Ton (Bending Capacity)
Control TypeNon-CNC
Automation GradeSemi-Automatic
BrandPilot
MaterialSheet Metal
Country of OriginMade in India
Model Name/NumberPBR830
Motor Power7.5 HP
Dimension2700x1550x2300 mm
Sheet Length3000 mm

Automatic Sheet Metal Press Brake Machine is designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


  • Frame Construction: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.
  • Ram & Bed: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.
  • Lubrication System: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.
  • Clutch And Brake: All "Accurate " Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.
  • Drive System: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.
  • Ram Adjustment Mechanism: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.


Additional Information:

  • Delivery Time: 25-30 DAYS
  • Packaging Details: PLASTIC PACKING
Get Best Quote Request Callback
NC Hydraulic Press Brake Machine

NC Hydraulic Press Brake Machine

Product Price: Rs 8.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
Control TypeNon-CNC
Automation GradeAutomatic
BrandPilot
MaterialMS
Country of OriginMade in India
Capacity100 Ton (Bending Capacity)
Model Name/NumberPBR1030
Dimension3350x1550x2300 mm
Motor Power7.5 HP
Sheet Length3000 mm
We are successfully meeting the varied requirements of our clients by providing the best quality range of NC Hydraulic Press Brake Machine. We bring to you top quality NC Hydraulic Press Brake. A fully electronic metal and alloy sheet pressing and bending system, our NC Hydraulic Press provides an unmatched precision and output quality. Keeping in mind the ever evolving requirements of our clients, we constantly innovate and improve our machines to ensure a hassle free performance in industrial production. The NC Hydraulic Press Brakes that we offer are widely known for their long service life, sturdy construction, corrosion resistance and high performance. As a result, our clients know us as one of the best NC Hydraulic Press Brake manufacturer. Our determined and focused experts spend ample amounts of time testing each machine to ensure that every hydraulic press leaving our manufacturing facility is ready for robust and reliable use. Our machines are designed to precision and are made with top grade steel to achieve maximum frame strength and stability. Customer satisfaction being our top priority, we spend enough time to understand the requirements of each client and can make customisations to meet their specific needs. NC hydraulic Press brakes are economical and very reliable solution for industry demand. NC hydraulic press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen. The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive.

The Numeric Control is used for Two Axis Control
1. Ram Axis Y      
2. Back Gauge Axis X.

Additional Information:

  • Delivery Time: 25-30 DAYS
  • Packaging Details: PLASTIC PACKING
Get Best Quote Request Callback
Pillar Type Hydraulic Press Machine

Pillar Type Hydraulic Press Machine

Product Price: Rs 2.5 Lakh / UnitGet Best Price

Product Details:
BrandPilot
Usage/ApplicationIndustrial
Automation GradeSemi Automatic
Capacity100 Ton (Bending Capacity)
MaterialMild Steel
Voltage220 V
Model Name/NumberPB100
Frequency50-60 Hz

we are Manufacturing and supplying Pillar Type Hydraulic Press Machine. we, at the Pilot Engineering, have earned a name for reliability and affordability. With years of experience and innovation, we have developed a wide range of various hydraulic presses, and are widely popular as one of the best Pillar Type Hydraulics Presses manufacturer in India. Our Pillar Type Hydraulic Press Machine incorporate a versatile body and can be used along with many other machines to perform various functions in auto service stations, repairing centers, metal and wood industries. Made of rust resistant top grade steel alloy, our pillar presses are built for robustness and longevity. Equipped with an electronic control system and available in automatic, semi-automatic and manual control modules; our pillar presses can be used to achieve high output rates at relatively lower costs. With various options of customisation and adaptability, the operation and usage possibilities of our pillar presses are nearly limitless. We provide high quality Pillar Type Hydraulic Press Machine in distinct specifications. The Pillar Type Hydraulic Press Machine, manufactured by us, renders precise structure to heavy duty machines having larger sizes.

Get Best Quote Request Callback

EXPLORE MORE CATEGORIES

Looking For "Hydraulic Press Machine"?
Thank youYour Enquiry has been sent successfully.
© Pilot Engineers. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.